驰鲍碍贰狈电磁控制溢流阀顿厂骋-03-2顿2-础100-50
由于谨慎必须支付维持在液压油可能另有濒别补诲迟*,
的粘度与温度 污染控制
Use phosphate ester or polyol ester fluid. When
phosphate ester fluid is used, prefix "F-"
请保持污染的NAS 163811.使用20
微米或更细的线路滤波器中的程度
peatability of the valve i
ine pressure compensation at
inlet and outlet port.使用流体相当于ISO VG32或VG46。
到型号序号,因为特殊密封件都需要被使用。
安装时应注意阀体上箭头应与介质流向*。
驰鲍碍贰狈电磁控制溢流阀顿厂骋-03-2顿2-础100-50
缩短阀门的使用寿命的污染控制。
special seals (fluororubber)
To make flow rate adjustment, loosen the lock nut and
turn the flow adjustment screw
clockwise or anticlockwise.
To throttle the flow, turn the screw
始终确保如下规定条件内使用的液压油:
are required to be used.Use water-glycol fluid.
温度:-15+60℃(5140&诲别驳;贵)的
Petroleum base oilsSynthetic fluids
Water containing fluids
Use fluids equivalent to ISO VG 32 or VG 46.